In short
- You need: the server, user name and password of your SIP number.
- The route works with any router, and even with no router of your own in the office at all.
- Transmission uses G.711 or, if the provider supports it, T.38.
- The registration with the provider can be encrypted with TLS.
Two ways to register
| Directly with the provider | Via the FRITZ!Box as an IP phone | |
|---|---|---|
| Access details | from the phone provider, usually in the customer area | you create them yourself in the router |
| Router | any | FRITZ!Box |
| Suitable if | you have a different router or the fax is to be independent of the router | the phone numbers are set up in the FRITZ!Box anyway |
For the FRITZ!Box, you create a telephone of the type “LAN/Wi-Fi (IP telephone)” under “Telephony › Telephony Devices › Configure New Device”, set a user name and password and assign the fax number. You then enter these details in the program.
Setup in four steps
Have the access details to hand
Server (registrar), user name and password. For widely used providers, Fritten&Fax comes with templates that already fill in the server.
Choose SIP in the program
The setup wizard asks for the sending route. Choose SIP and enter the details.
Check the connection
The program registers with the server and shows whether the registration succeeded.
Send a test fax
A test fax to your own number confirms that the transmission works.
G.711 or T.38?
A fax can travel through a data network in two ways. With G.711 it is transmitted as sound, like a phone call; that works with every provider, but is sensitive to interference on the line. T.38 is made specifically for faxes and transmits the fax data itself – that is more robust, but has to be supported by the provider.
Rule of thumb: if your provider supports T.38, switch it on. If a fax breaks off repeatedly with G.711, T.38 is the first thing to try.
Receiving via SIP
With the Pro edition, the program also answers faxes through the same registration. Use a separate phone number just for fax for this.
If the registration runs through the FRITZ!Box, the fax number must not be assigned to any other device there – otherwise that device answers the call, and the fax does not reach the program.