Fritten&Fax

Guide · Setup

How do I set up faxing via the router?

In four steps: decide on the fax number at the router, switch on the interface for fax programs, choose the router in the program and have the connection checked, send a test fax. The requirement is a router that comes with this interface – for Fritten&Fax, a FRITZ!Box.

3 min readLast updated: November 2026

In short

  • Requirement: a FRITZ!Box on the same network as the PC.
  • You switch on the “CAPI over TCP” interface once with a phone code.
  • You don’t need access details from a phone provider for this route.
  • With a different router, you fax via SIP – that is the second, equally good route.

What you need beforehand

  • A FRITZ!Box on which your phone numbers are set up, on the same network as the PC.
  • A phone number that is used for fax. You will find it in the router’s user interface under “Telephony › Telephone Numbers”.
  • A phone that is registered with the FRITZ!Box – just once, to switch on the interface.

Setup in four steps

  1. Switch on the interface

    Dial #96*3* on a phone connected to the FRITZ!Box. That switches on “CAPI over TCP”. With #96*2* you switch it off again.

  2. Choose the router in the program

    The setup wizard asks for the sending route. Choose the FRITZ!Box; “Detect router” finds it on the network.

  3. Enter the fax number and sender

    The phone number used for faxing and the sender ID that the recipient sees.

  4. Check and send a test fax

    “Check” shows whether every step is right. A test fax to your own number confirms that everything works together.

If the connection can’t be established

  • The router isn’t found: Are the PC and the FRITZ!Box on the same network? On a guest network or behind a second router, the box cannot be reached.
  • The interface doesn’t respond: Dial the phone code #96*3* once more. After the router has been reset, the interface is off again.
  • The router’s address: Enter the name or the IPv4 address of the box. The program tells you if it needs something different.
  • Wrong line: “Check” compares the setting with the box and, where necessary, suggests the right one.

Receiving via the router

By the same route, Fritten&Fax also answers faxes in the Pro edition. Alternatively, the FRITZ!Box answers faxes itself and stores them; the program then displays this fax storage – in the free edition too.

Follow-up questions

What people often ask next

Do I need a driver?

No. Fritten&Fax talks directly to the FRITZ!Box. Nothing else is installed.

Does this work with any router?

This route requires a FRITZ!Box. With any other router, you fax via SIP directly through your phone provider – how that works is explained on the page “How do I set up faxing via a SIP number?”.

Can I fax via the router when I’m out and about, too?

Yes, through your FRITZ!Box’s VPN. The PC then connects to the office network from outside and faxes as usual.

Is the interface a security risk?

It can only be reached on your own network, not from the internet. When you no longer need it, switch it off again with #96*2*.

Start for free.

Fritten&Fax Free costs nothing, for good. Try Pro and Business for 30 days – no payment details and no automatic renewal.