Fritten&Fax

Guide · Setup

How do I set up faxing via a SIP number?

You enter the SIP access details of your phone number, the program registers with them and faxes directly through your phone provider. The router merely passes the connection through – which is why this route works with any router.

3 min readLast updated: November 2026

In short

  • You need: the server, user name and password of your SIP number.
  • The route works with any router, and even with no router of your own in the office at all.
  • Transmission uses G.711 or, if the provider supports it, T.38.
  • The registration with the provider can be encrypted with TLS.

Two ways to register

Directly with the providerVia the FRITZ!Box as an IP phone
Access detailsfrom the phone provider, usually in the customer areayou create them yourself in the router
RouteranyFRITZ!Box
Suitable ifyou have a different router or the fax is to be independent of the routerthe phone numbers are set up in the FRITZ!Box anyway

For the FRITZ!Box, you create a telephone of the type “LAN/Wi-Fi (IP telephone)” under “Telephony › Telephony Devices › Configure New Device”, set a user name and password and assign the fax number. You then enter these details in the program.

Setup in four steps

  1. Have the access details to hand

    Server (registrar), user name and password. For widely used providers, Fritten&Fax comes with templates that already fill in the server.

  2. Choose SIP in the program

    The setup wizard asks for the sending route. Choose SIP and enter the details.

  3. Check the connection

    The program registers with the server and shows whether the registration succeeded.

  4. Send a test fax

    A test fax to your own number confirms that the transmission works.

G.711 or T.38?

A fax can travel through a data network in two ways. With G.711 it is transmitted as sound, like a phone call; that works with every provider, but is sensitive to interference on the line. T.38 is made specifically for faxes and transmits the fax data itself – that is more robust, but has to be supported by the provider.

Rule of thumb: if your provider supports T.38, switch it on. If a fax breaks off repeatedly with G.711, T.38 is the first thing to try.

Receiving via SIP

With the Pro edition, the program also answers faxes through the same registration. Use a separate phone number just for fax for this.

If the registration runs through the FRITZ!Box, the fax number must not be assigned to any other device there – otherwise that device answers the call, and the fax does not reach the program.

Follow-up questions

What people often ask next

Where do I get the SIP access details?

From your phone provider, usually in the customer area under the settings for the phone number.

Does my provider support fax?

Most transmit faxes with G.711. Whether T.38 is offered is stated in the provider’s technical details – or you try it out with a test fax.

Is the connection encrypted?

The registration and – depending on the provider – the transmission as far as the provider can be encrypted with TLS and SRTP. In the telephone network beyond that, a fax always travels unencrypted.

Does this work on a phone too?

Yes. Fritten&Fax for Android also faxes via SIP – even with no router in the background at all.

Start for free.

Fritten&Fax Free costs nothing, for good. Try Pro and Business for 30 days – no payment details and no automatic renewal.