In short
- Requirement: a FRITZ!Box on the same network as the PC.
- You switch on the “CAPI over TCP” interface once with a phone code.
- You don’t need access details from a phone provider for this route.
- With a different router, you fax via SIP – that is the second, equally good route.
What you need beforehand
- A FRITZ!Box on which your phone numbers are set up, on the same network as the PC.
- A phone number that is used for fax. You will find it in the router’s user interface under “Telephony › Telephone Numbers”.
- A phone that is registered with the FRITZ!Box – just once, to switch on the interface.
Setup in four steps
Switch on the interface
Dial #96*3* on a phone connected to the FRITZ!Box. That switches on “CAPI over TCP”. With #96*2* you switch it off again.
Choose the router in the program
The setup wizard asks for the sending route. Choose the FRITZ!Box; “Detect router” finds it on the network.
Enter the fax number and sender
The phone number used for faxing and the sender ID that the recipient sees.
Check and send a test fax
“Check” shows whether every step is right. A test fax to your own number confirms that everything works together.
If the connection can’t be established
- The router isn’t found: Are the PC and the FRITZ!Box on the same network? On a guest network or behind a second router, the box cannot be reached.
- The interface doesn’t respond: Dial the phone code #96*3* once more. After the router has been reset, the interface is off again.
- The router’s address: Enter the name or the IPv4 address of the box. The program tells you if it needs something different.
- Wrong line: “Check” compares the setting with the box and, where necessary, suggests the right one.
Receiving via the router
By the same route, Fritten&Fax also answers faxes in the Pro edition. Alternatively, the FRITZ!Box answers faxes itself and stores them; the program then displays this fax storage – in the free edition too.